Die Casting Blog for Cast-Parts Aluminum Die Cast Parts and Zinc Die Cast Parts manufacturing and cast parts production

September 15, 2020

New Post – Hot Chamber Die Casting in 2020

Filed under: Cast Parts — admin @ 7:26 pm

DieCastingZinc Update to Cast Parts,

Hot Chamber Die Casting in 2020
– Hot-chamber Die Casting. The die casting industry has established itself in different fields of application including electronics, and the automotive industry. Die casting is basically the casting of molten metal with the use of dies of  different shapes.  The molding is done by the application of force within the dies and …
You may view the latest post at https://www.diecastingzinc.com/zinc/hot_chamber_die_casting_in_2020/

Die Casting Zinc Parts

No longer interested email from Zinc Die Casting Blog?. Please send email to sales@diecastingzinc.com to unsubscribe

September 11, 2020

9/11 Memorial in 2020

Filed under: Cast Parts — Editor @ 3:22 am

9/11 Memorial in 2020 –

The 9-11 terrorist attack was a series of four coordinated Islamic terrorist group attacks by al-Qaeda on the United States on the morning of Tuesday, September 11, 2001. The attacks killed almost 3,000 people, injured over 6,000 others, and caused at least $10 billion in infrastructure and property damage.

They used four airliners operated by two major U.S. airline carriers United Airlines and American Airlines, all of which departed from airports in the northeastern United States bound for California. These airplanes were hijacked by 19 al-Qaeda terrorists. Two of the planes, American Airlines Flight 11 and United Airlines Flight 175, were crashed into the North and South towers, respectively, of the World Trade Center complex in New York City. Within an hour and 42 minutes, both 110-story towers collapsed, with debris and the resulting fires causing partial or complete collapse of all other buildings in the World Trade Center complex, including the 47-story 7 World Trade Center tower, as well as significant damage to ten other large surrounding structures. A third plane, American Airlines Flight 77, was crashed into the Pentagon (the headquarters of the United States Department of Defense) in Arlington County, Virginia, leading to a partial collapse of the building’s western side. The fourth plane, United Airlines Flight 93, initially was steered toward Washington, D.C., but crashed into a field in Stonycreek Township near Shanksville, Pennsylvania, after its passengers tried to overcome the hijackers. 9/11 was the single deadliest incident for firefighters and law enforcement officers in the history of the United States, with 343 and 72 killed respectively.

Holiday at Kinetic Die Casting Company
Die Casting Company
Kinetic Die Casting Company Jobs
American Die Casting Company
Die Casting Company Information

Kinetic Die Casting Company 6918 Beck Avenue, North Hollywood, California 91605 USA
E-mail sales@kineticdc.com Toll Free: (800) 524-8083 Local: (818) 982-9200 Fax: (818) 982-0877
Die Casting Parts Prices

Original Post: https://www.kineticdiecasting.com/kdc/9-11-memorial-in-2020/

Kinetic Die Casting Company 6918 Beck Avenue North Hollywood California 818-982-9200

No longer interested email from Kinetic Die Casting Blog?. Please email sales@kineticdc.com to unsubscribe

September 10, 2020

New Post – Die Casting: A Great Choice in Casting Methods in 2020

Filed under: Cast Parts — admin @ 7:15 pm

DieCastingZinc Update to Cast Parts,

Die Casting: A Great Choice in Casting Methods in 2020
– Die Casting: A Great Choice in Casting Methods. Die casting is fast becoming the most popular casting methods used today. Many companies engaged in the business of metalworking are realizing the power of die casting in terms of efficiency, economy, and product result. It’s not difficult to see why a …
You may view the latest post at https://www.diecastingzinc.com/zinc/die-casting-a-great-choice-in-casting-methods-in-2020/

Die Casting Zinc Parts

No longer interested email from Zinc Die Casting Blog?. Please send email to sales@diecastingzinc.com to unsubscribe

Methods for Making Die Casting Aluminum Boxes 2020

Filed under: Cast Parts — Editor @ 3:08 am

Methods for Making Die Casting Aluminum Boxes 2020 –

Methods for making Die Casting Aluminum Boxes. There are Methods for making Die Casting Aluminum Boxes. Die casting aluminum boxes through a process where molten aluminum is forced under high pressure into mold cavities. This process, invented in the 1830’s by Elisha K. Root, makes sure that the boxes which will be produced have a fine surface quality, well detailed design, and must also be dimensionally stable. What are the methods?

  • The first method requires the mold to be sprayed with lubricant and then closed. The lubricant is necessary since it can control the die’s temperature and can also aid in casting removal. Between 10-175 Mpa or 1,500-25,000 psi is the pressure necessary before the molten metal is shot into the die. The said pressure is maintained even after the die is filled. The die will only be opened after the casting has solidified. When it is opened, the ejector pins shall eject the shots. Afterwards, the scrap with the gate, flash, sprues, and runners are separated from the castings. A sprue is a passage where the molten aluminum can be introduced into the mold while flash is excess material connected to the product which must be removed. The removal of the scrap, gate, flash, sprues, and runners can be done through the use of a hydraulic or power press or can even be done by sawing. However, sawing requires grinding in order to even the scrap marks.

Kinetic Die Casting Company – To get a price for aluminum die casting parts or die casting tooling, call toll free 800-524-8083 and ask for sales. Or email us at sales@kineticdc.com for a fast response on a price quote.

Kinetic Die Casting is a die casting company specializing in aluminum and zinc parts. If you would like to request a quote, please visit our website:Kinetic Die Casting Company

Die Casting Boxes and Enclosure Die Castings
Die Casting Box Parts
Kinetic Die Casting Newsletter Articles
Die Casting Parts Draft Angle
Die Casting Box Pictures

Kinetic Die Casting Company 6918 Beck Avenue, North Hollywood, California 91605 USA
E-mail sales@kineticdc.com Toll Free: (800) 524-8083 Local: (818) 982-9200 Fax: (818) 982-0877
Die Casting Box Prices

Original Post: https://www.kineticdiecasting.com/kdc/methods-for-making-die-casting-aluminum-boxes-2020/

Kinetic Die Casting Company 6918 Beck Avenue North Hollywood California 818-982-9200

No longer interested email from Kinetic Die Casting Blog?. Please email sales@kineticdc.com to unsubscribe

September 8, 2020

New Post – Zinc Die Casting Companies in 2020

Filed under: Cast Parts — admin @ 7:27 pm

DieCastingZinc Update to Cast Parts,

Zinc Die Casting Companies in 2020
– “A Name You Can Trust”
Making aluminum parts from the die casting process is one job that a diecasting company one has to take seriously. Aside from the fact that die casting can be a pretty tough process, the parts that should be produced should be perfect for the purpose …
You may view the latest post at https://www.diecastingzinc.com/zinc/zinc-die-casting-companies-in-2020/

Die Casting Zinc Parts

No longer interested email from Zinc Die Casting Blog?. Please send email to sales@diecastingzinc.com to unsubscribe

« Newer PostsOlder Posts »

Powered by WordPress