Die Casting Blog for Cast-Parts Aluminum Die Cast Parts and Zinc Die Cast Parts manufacturing and cast parts production

September 24, 2010

How Are Aluminum Aircraft Parts Used?

Filed under: Aluminum Casting Parts,Cast Parts,Die Casting Company — Tags: , , , , — admin @ 1:10 am

How Are Aluminum Aircraft Parts Used? The popular aircraft airframe has been the most challenging function for aluminum alloys; to account the progress of the high strength alloys is as well to account the progress of airframes. Die Casting Aluminum Alloy is the first high strength, high temperature treatable aluminum alloy and was utilized originally for the structure of stiff airplanes. Duralumin was actually an aluminum-copper-magnesium alloy. It was initiated in the country of Germany and expanded in the United States of America as alloy 17S-T. It was employed first and foremost as a sheet and plate.

As the 20th century evolved, aluminum turned out to be an important metal in aircraft. The cylinder mass of the engine that controlled the plane of the famous Wright brothers at Kitty Hawk in 1903 was a one piece die casting part in an aluminum alloy consisting of 8% copper. The aluminum propeller blades emerged as early as 1907 and aluminum seats, covers, cast brackets, cowlings, and comparable parts were regular by the start of the World War I.

In the year 1916, L. Brequet created a scouting bomber that identified the primary utilization of aluminum in the functioning configuration of a plane. By the end of the war, Germany and the Allies used aluminum alloys intended for the constructional scaffolding of fuselage and section assemblies.

If you are looking for Die Casting Parts look at this website.

Follow on Twitter
Follow Us On Twitter

Die Castings Blog gives information on how to get a Aluminum Die Castings and Zinc Die Castings. If you are looking for Die Casting Part Prices look at this website.

Cast Parts Die Casting Company
6918 Beck Avenue
North Hollywood, CA. 91605
818-982-9386 Phone
Sales@Cast-Parts.com.

September 10, 2010

Pressure Die Casting Aluminum Military Parts vs Extrusions

Filed under: Aluminum Casting Parts,Cast Parts,Die Casting Company — Tags: , , , — admin @ 1:57 am

Pressure Die Casting Aluminum Military Parts vs Extrusions. Die casting is a process wherein molten aluminum is injected into a mold with great pressure. Afterwards, they are then set to water cool. When they are opened, they are then ejected. Aluminum military parts are created through this simple and inexpensive manufacturing process. As compared to other processes like sand casting, gravity casting, forging, extrusion, plastic injection moldings and stamping, die casting is inarguably the most efficient process for molding aluminum military parts.

Pressure die casting parts are more recyclable as opposed to forgings and extrusions. Aluminum die casting is efficient and economical when it comes to maintenance, refurbishing, remanufacturing, and repair for extending its life. It is non toxic and practical, and can readily be used again and again.

Pressure die casting is produced faster compared to extrusions. It has more net shape, which means that more features, depressions and angles can be placed in one operation. You can create more complex shapes, have thinner sheets, and more accurate dimensions with high pressure die casting for aluminum military parts. Holes can be cast in place rather than machining them later, adding to a higher production cost. There will be fewer waste products in pressure die casting aluminum military parts as opposed to extrusions.

If you are looking for Die Casting Parts look at this website.

Follow on Twitter
Follow Us On Twitter

Die Castings Blog gives information on how to get a Aluminum Die Castings and Zinc Die Castings. If you are looking for Die Casting Part Prices look at this website.

Cast Parts Die Casting Company
6918 Beck Avenue
North Hollywood, CA. 91605
818-982-9386 Phone
Sales@Cast-Parts.com.

September 3, 2010

Pressure Die Casting Aluminum Lighting Parts vs Sand Casting

Filed under: Aluminum Casting Parts,Cast Parts,Die Casting Company — Tags: , , , — admin @ 1:55 am

Pressure Die Casting Aluminum Lighting Parts vs Sand Casting. Aluminum sand cast tooling roughly costs from $500 – $7,500, depending on the size and complexity. Pressure die cast tooling on the other hand costs from $5,000 – $75,000, again depending on the size and complexity of the die cast parts. However, tooling can create from 100,000 parts to as much as 1,000,000 pressure die casting parts.

In sand casting, the moulds or patterns are used to make sand moulds. The preparation and bonding process of sand moulds is the most critical step in the process. This technique is usually used for high volume production.

With die casting, the mould is usually made of metal like cast iron or steel. They are generally not destroyed but are made permanent. There are several types of die casting, the most widely used being high pressure die casting. 50% of light alloy casting production are made from high pressure die casting.

Sand casting and pressure die casting processes vary from some hundred to some thousand parts. The cost of tooling and machinery is required for aluminum sand casting that is not normally required in the die casting process due to its tighter tolerance of the pressure die cast process in making the aluminum parts.

If you are looking for Die Casting Parts look at this website.

Die Castings Blog gives information on how to get a Aluminum Die Castings and Zinc Die Castings. If you are looking for Die Casting Part Prices look at this website.

Cast Parts Die Casting Company
6918 Beck Avenue
North Hollywood, CA. 91605
818-982-9386 Phone
Sales@Cast-Parts.com.

Powered by WordPress