Die Casting Blog for Cast-Parts Aluminum Die Cast Parts and Zinc Die Cast Parts manufacturing and cast parts production

November 3, 2022

Aluminum Lighting Fixtures that work for you in 2022

Aluminum lighting fixtures are at work for you

Whenever your car stops at a red light, chances are one of the commonplace, yet unnoticed, aluminum lighting fixtures has just served well in keeping order in your daily life. Indeed, street traffic light housings are not the only applications of aluminum lighting fixtures because of the many benefits offered by these die cast products.

For some time in the past, the production of lighting fixtures was a labor-intensive process, requiring the lengthy and laborious process of welding different pieces together. Naturally, this process is also costly and imposed limits on the shapes that could be designed. However, with the advances in die casting technology, aluminum lighting fixtures have been developed. Through die casting turning out products that are already in net shape, mass-production bringing in economies of scale has been made possible. The less-expensive aluminum lighting fixtures could likewise be designed into any desirable shape and powder-coated for a good-looking finish.

Aluminum’s light weight also contributed to shipping cost reduction, making these products an attractive option vis-à-vis their steel counterparts which could be heavier by as much as one-third. While plastic lighting fixtures would be lighter, these would not last as long as the aluminum lighting fixtures. This longevity is brought about by the superb thermal properties of aluminum which likewise enable its applications in various lighting requirements especially when high temperature bulbs are used. Common applications for aluminum lighting fixtures in addition to traffic light housings include those for garage lighting, hanging lights, airport runway lights and video camera lights.

Cast Parts Company
is an American Metal Casting Company
and also has a
Cast Parts Blog and
gives information on how to get Casting Part Prices. If you are looking for Cast Parts Prices or
Die Casting Part Prices,
look at this website.
Follow Cast-Parts on Twitter
.

Sponsored Listings:

  • Eaton Place Pensacola AirBnb Rental Eaton Place Pensacola, 3 Bedrooms 2 Baths Long Term Stays
  • AirBnB Three Bedrooms and Two Baths AirBnB Swift Waters Hanger 3 Bedroom
    House in Pensacola
  • Contact:

    Cast Parts Die Casting Company

    818-982-9386

    Sales@Cast-Parts.com

    December 2, 2015

    Pressure Die Casting Aluminum Lighting vs. Sand Casting

    Pressure Die Casting Aluminum Lighting vs Sand Casting. Aluminum sand cast tooling roughly costs from $500 – $7,500, depending on the size and complexity. Pressure die cast tooling on the other hand costs from $5,000 – $75,000, again depending on the size and complexity of the die cast parts. However, tooling can create from 100,000 parts to as much as 1,000,000 pressure die casting parts.

    When using sand casting, the molds or patterns are used to make sand molds. The preparation and bonding process of sand molds is the most critical step in the process. This technique is usually used for high volume production.

    When using die casting, the mold is usually made of metal like cast iron or steel. They are generally not destroyed but are made permanent. There are several types of die casting, the most widely used being high pressure die casting. 50% of light alloy casting production are made from high pressure die casting.

    Furthermore, sand casting and pressure die casting processes vary from some hundred to some thousand parts. The cost of tooling and machinery is required for aluminum sand casting that is not normally required in the die casting process due to its tighter tolerance of the pressure die cast process in making the aluminum parts.

    die casing alloys
    If you are looking for information about Die Casting Alloys, look at this website. Die Castings Blog gives information on how to get a Aluminum Die Castings and Zinc Die Castings. If you are looking for Die Casting Part Prices look at this website.

    Cast Parts Company Die Casting Company
    6918 Beck Avenue
    North Hollywood, CA. 91605
    818-982-9386 Phone
    Sales@Cast-Parts.com.

    August 23, 2011

    Pressure Die Casting Aluminum Lighting Parts vs Sand Casting

    Pressure Die Casting Aluminum Lighting Parts vs Sand Casting – The die casting part cost is less for Die Casting Aluminum Lighting Parts vs Sand Casting. Aluminum sand cast tooling roughly costs from $500 – $7,500, depending on the size and complexity. Pressure die cast tooling on the other hand costs from $5,000 – $75,000, again depending on the size and complexity of the die cast parts. However, tooling can create from 100,000 parts to as much as 1,000,000 pressure die casting parts.

    In sand casting, the molds or patterns are used to make sand molds. The preparation and bonding process of sand molds is the most critical step in the process. This technique is usually used for high volume production.

    With die casting, the die casting mold is usually made of metal like cast iron or steel. They are generally not destroyed but are made permanent. There are several types of die casting, the most widely used being high pressure die casting. 50% of light alloy casting production are made from high pressure die casting.

    Sand casting and pressure die casting processes vary from some hundred to some thousand parts. The cost of tooling and machinery is required for aluminum sand casting that is not normally required in the die casting process due to its tighter tolerance of the pressure die cast process in making the aluminum parts.

    Die Castings Blog gives information on how to get a Aluminum and Zinc Die Castings. If you are looking for Die Casting Part Prices look at this website.

    Follow on Twitter
    Follow Us On Twitter

    Cast Parts Die Casting Company
    6918 Beck Avenue
    North Hollywood, CA. 91605
    818-982-9386 Phone
    Sales@Cast-Parts.com.

    June 16, 2011

    How are Aluminum Die Casting Lighting Fixture Parts Used?

    How are Aluminum Die Casting Lighting Fixture Parts Used? Aluminum lighting fixture parts are electrical devices mainly used for creating artificial light and illumination for homes and buildings. They are used either for indoor or outdoor lighting fixtures. Before the invention of aluminum die casting, lighting fixtures are created through welding techniques, making the system expensive and time consuming. Now, the science of aluminum die casting makes the process easier and a whole lot faster.

    Aluminum lighting fixture die casting parts usually consist of: a light source (lamp), a light reflector, an aperture (with or without lens), an outer shell or housing for alignment and protection, an electric ballast and connection to a power source. They are often used at the automotive lighting industry, marine lighting, medical lighting and aerospace lighting.

    Aluminum die casting lighting fixture parts are lightweight, durable and long lasting, making them ideal for several uses. They are often used to strengthen construction both on the inside and outside many establishments. They allow easier construction for different lighting techniques. This makes them very versatile, and can be used for many purposes: medical offices, parking garage lighting, bullet lights, street traffic lights, walk lights, outdoor coach light fixtures and high temperature light fixtures. They are also available in a wide array of shapes and sizes, ensuring better output and production of different lighting systems.

    Follow on Twitter
    Follow Us On Twitter

    Die Castings Blog gives information on how to get a Aluminum Die Castings and Zinc Die Castings. If you are looking for Die Casting Part Prices look at this website.

    Cast Parts Die Casting Company
    6918 Beck Avenue
    North Hollywood, CA. 91605
    818-982-9386 Phone
    Sales@Cast-Parts.com.

    June 2, 2011

    Where do you find Aluminum Die Casting Lighting Fixture Parts?

    Where do you find Aluminum Die Casting Lighting Fixture Parts? Lighting fixtures and parts made out of aluminum die casting have a lot of advantages and benefits as compared to fixtures and parts made through other manufacturing processes and with other materials and alloys. Here are some of these known advantages:

  • First of all, aluminum die casting lighting fixture parts are cost-efficient, meaning they are less expensive as compared to other fixture parts made with different materials and through different processes.
  • Aluminum lighting fixture parts have good thermal properties, meaning they can be used at high temperatures and when used with high temperature power supplies and bulbs. It can also last longer, so you’re saving a lot of money on repairs and replacements.
  • On one hand, housings for such fixtures were formerly welded together, making it costly, time and labor-consuming, plus were limited in terms of shaping and molding. Aluminum lighting fixtures, on the other hand, can be molded and shaped in different ways possible, so housing them isn’t as costly and limited anymore.
  • So where exactly can you find these aluminum lighting fixture parts? If the lighting fixtures at home, in the office, or in any building or facility are in need of parts, you can either visit stores that sell ready-made lighting fixture parts or visit manufacturers of aluminum die casting parts to get them molded and done in normally a short period of time.

    If you are looking for Aluminum Cast Parts, look at this website.

    Follow on Twitter
    Follow Us On Twitter

    Die Castings Blog gives information on how to get a Aluminum Die Castings and Zinc Die Castings. If you are looking for Die Casting Part Prices look at this website.

    Cast Parts Die Casting Company
    6918 Beck Avenue
    North Hollywood, CA. 91605
    818-982-9386 Phone
    Sales@Cast-Parts.com.

    Older Posts »

    Powered by WordPress